Dual energy absorber system – Internal Inertial Brake And External Shock Pack – is designed to reduce the risk of cable failure when contacting an edge during a fall eventFeatures: May be used as a traditional SRD for overhead anchorageoptions or in below harness Dring anchorage conditions Loadindicating swivel carabiner with 3,600 lb. gate. 7/32 Galvanized steel cable for added cut resistance Dual energy absorber system – internal inertial brake andexternal shock packMaterial Specifications:Cable: 7/32″ galvanized steelConnector: Alloy Steel; Min. 5,000 lbs. tensile strengthConnector Gates: Alloy Steel; Min. 3,600 lbs. front load andside loadPerformance Specifications:Tensile Strength: 3,000 lbs.Max. Capacity: 310 lbs.Maximum Arrest Distance: 54″ANSI Class BRelevant Standards:OSHA: CFR1926.502, CFR1910.66ANSI: ANSI Z359.13, ANSI Z359.14 LEWarnings: Read, understand and follow all labels and instructions prior to use. Inspect before each use. Remove from service if there is evidence of damage or excessive wear. Never attach a Restraint Lanyard to the front or side DRings.MFG WARNING: THIS SPECIFICATION SHEET PROVIDES AN OVERVIEW OF PRODUCTS AVAILABLE FROM FALLTECH. CARE HAS BEEN TAKEN TO ASSURE THE ACCURACY OFTHE INFORMATION. IT DOES NOT PROVIDE IMPORTANT PRODUCT WARNINGS AND INSTRUCTIONS. FALLTECH RECOMMENDS ALL USERS OF FALL PROTECTIONEQUIPMENT UNDERGO THOROUGH TRAINING, AND THAT ALL WARNINGS AND INSTRUCTIONS PROVIDED WITH THESE PRODUCTS BE THOROUGHLY READ UNDERSTOOD PRIOR TO USE. FAILURE TO READ AND FOLLOW ALL PRODUCT WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.