Search
bullet Workplace Signs
bullet Back Support Belts
bullet Bloodborne Pathogen Products
bullet Rainsuits, Boots
bullet Dust Mask, Respirators
bullet Emergency Survival Kits
bullet External Defibrillators (AED)
bullet Eyewash Stations
bullet Fall Protection
bullet First Aid, Medical Supplies
bullet FLM
bullet Flora Finder Glasses
bullet Gatorade®
bullet Gloves
bullet Hard Hats
bullet Hearing Protection
bullet Heat Stress Protection
bullet Orthopedic Products
bullet Protective Clothing
bullet PTA Fundraisers
bullet Rainsuits
bullet Safety Glasses
bullet Safety Vests
USFS Medical Unit Order Form
List of Manufacturers
  Minimum Order: $10.00
Click below to download
Includes:
Poison Oak & Ivy Relief, Insect Relief
Foot Relief, Sunscreen, Lip Balm
Assorted Bandages, Gauzes, Bandaids
Medications
Instruments, Gloves and Misc.


Follow EquipDirect1 on Twitter

Equipment Direct Main Office:
2861 Saturn St., Suite D
Brea, CA 92821
800-424-4410
Fax: 800-842-2412

Indio Satellite Office:
45116 Commerce street #7
Indio, CA 92201
760-347-0318

Hard Hats

Hard Hats & Accessories

 All hard hats are classified according to the specific impact and electrical performance requirements they are designed to meet. This classification is also commonly refered to as the ANSI Z89.1 standard. All hard hats in accordance with this standard meet or exceed either Type I or Type II impact requirements. In addition to type classifications, all hard hats are further classified as meeting Class G, Class E, or Class C electrical requirements. Below we outline each of these types and electrical classes.

All hard hats are shipped with an ANSI certification label on the inside of the hard hat’s shell. This label will clearly identify what type and class standards it was designed to meet. If this label is missing or cannot be read it is recommended that it should be replaced.

Hard Hat Impact Types

Type I Hard Hats

Type I hard hats are intended to reduce the force of impact resulting for a blow only to the top of the head. All hard hats, except bump caps, listed on the Cooper Safety website are Type I (top impact) hard hats.

Type II Hard Hats

Type II hard hats are intended to reduce the force of impact resulting from a blow which may be received off center or to the top of the head. A Type II hard hat typically is lined on the inside with thick high density foam.

Electrical Classes

Class G (General)

Class G hard hats are intended to reduce the danger of contact exposure to low voltage conductors. Test samples are proof tested at 2200 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the hard hat protects the wearer. Please note: Class G hard hats were formerly known as Class A.

Class E (Electrical)

Class E hard hats are intended to reduce the danger of exposure to high voltage conductors. Test samples are proof-tested at 20,000 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the helmet protects the wearer. Please note: Class E hard hats were formerly known as Class B.

Class C (Conductive)

Class C hard hats are not intended to provide protection against contact with electrical conductors.
 
 
Designed Hard Hats
Stylish Design Hard Hats
Full Brim Hard Hat with Ratchet Suspension
We Have A Select Select Range of Colors To Choose From
Hard Hats With Pinlock Suspension
We have a wide range of colors to chose from
Hard Hats With Ratcheted Suspension
We selected range of colors in stock
Shopping Cart
Your cart is empty.